Download And Install Qualcomm Hs

Through this post, you can tải về Qualcomm HS-USB QDLoader 9008 Drivers & install them on your PC. These drivers are compatible with any Windows 7, 8, 8.1 & 10 PC with 32-bit or 64-bit CPU architecture. You will need khổng lồ install these drivers in order for the PC khổng lồ detect your Qualcomilimet phone or tablet in EDL (Emergency Download) mode.

Bạn đang xem: Download And Install Qualcomm Hs


Every mobile vendor releases the USB Drivers for their devices. These drivers are either come as a standalone executable application or pre-installed on the devices. Moreover, these drivers help in performing basic activities lượt thích transferring music, videos, pictures, documents, or for executing ADB và fastboot commands.

But the purpose of these OEM USB drivers is only applicable until your device is in a fully-working condition.


Table of ContentsHow to Install Qualcomm HS-USB QDLoader 9008 Drivers?

Why và when you would need these drivers

If you flash an incompatible software on your device, there are high chances of getting your device bricked. In several such cases, flashing the stochồng firmware using fastboot or tools like Odin, Mi Flash, Nokia OST LA, LGUPhường, etc would not be possible. That’s because the normal USB drivers would not be able to recognize your Android device once it is connected to PC.

But if your device is running a Qualcomilimet Snaprồng processor, then there’s a chance you can download and install the stock firmware using QPST tool to recover your device from the bricked state. And for that, your device must be booted into EDL mode and recognized as ‘Qualcomm HS-USB QDLoader 9008‘ by your Windows PC’s Device Manager.

So, if you want to lớn unbrick your device, you must first tải về the required Qualcomilimet USB drivers and install them on your PC. The instructions below will help you install these USB drivers on any Windows 10/8.1/8/7 PC with 32-bit or 64-bit architecture.

*


Prerequisites

Follow the below points only if you are going khổng lồ install the Qualcomilimet HS-USB QDLoader 9008 Drivers via the ‘Manual’ method. However, if you prefer lớn install the drivers using the ‘Direct Method’ then you may skip this part.

bcdedit /mix testsigning onNow reboot your PC khổng lồ enter Test ModeAfter the installation process is over, you may exit the Test mode by entering the below code:bcdedit /set testsigning off

Download Qualcomm HS-USB QDLoader 9008 Drivers

Make sure khổng lồ download the USB Drivers as per the ‘Installation Method’ you chose.

Xem thêm: Có Phải Tiền Không Mua Được Tất Cả ? Có Phải Tiền Là Tất Cả

For Automatic & Direct Method:


For Manual Method:

How to lớn Install Qualcomilimet HS-USB QDLoader 9008 Drivers?

The provided Qualcomilimet USB drivers could be installed on any 32-bit or 64-bit Windows PC via two different methods. The first method follows an automatic & direct approach & lets you install the said drivers by simply using the thiết đặt wizard. This is the easiest & recommended way to install Qualcomilimet HS-USB QDLoader 9008 drivers on your PC.


However, if the first method fails for some reason, you can follow the second method that takes the manual approach for the installation.

Method 1: Automatic & Direct

Download Qualcomm HS-USB QDLoader 9008 drivers corresponding to lớn your PC’s CPU architecture (32-bit or 64-bit).Go khổng lồ the directory where the file was downloaded.Double-cliông chồng on the ‘QDLoader_HS-USB_Driver_xxbit_Setup.exe‘ executable file.Cliông xã ‘Next‘ after accepting the terms và conditions.

That’s it! The Qualcomm Android USB drivers are now successfully installed on your PC.

Method 2: Manual

If the automatic method does not work & your PC still doesn’t recognize your Android device, then you should follow the manual method as listed below.

Download the ‘Qualcomm-Driver.zip’ tệp tin.Extract the zip tệp tin to a suitable location on your PC.Connect your Android device to lớn PC via the USB cable.Navigate to the thư mục where ADB and Fastboot tools are installed.Press the SHIFT key and right-cliông chồng on an empty area inside this thư mục.Type the following code in the PowerShell window khổng lồ reboot your Android device into EDL mode:

adb reboot edlNote: On certain devices, simply executing the above commvà to lớn reboot into EDL mode might not work. In such a case, you will need to search online for a dedicated method for your specific Android device.Go to lớn Control Panel > Device Manager on your Windows PC.Right-cliông xã on it và select ‘Update Driver software‘.Now you would see a Windows Security prompt on your PC’s screen.So there you go! You have just been able lớn download Qualcomilimet HS-USB QDLoader 9008 drivers và also learned how to lớn install them using two different methods. You can now go ahead và unbrick your device by flashing the stoông xã firmware using the QPST tool, while your Android device is in EDL mode.

With that said, if you are having any query with respect to any part of this guide or you didn’t understand any of the installation steps, vì ask us in the comments section below.